Esys Software Psdzdata
Below is BMW E-SYS 3.29.0 + Psdzdata 3.61.5 Lite free download link. Work with BMW ENET Cable and ICOM for BMW Coding easy…
Download BMW E-SYS 3.29.0 Setup Build 48884:
Here you can download BMW ESYS 3.29.0 + ESYS Launcher Premium 2.7.1 + Psdzdata V3.61.5 Lite for BMW coding! Compatible with BMW ENET Cable and ICOM. Note before you download: ALL links here are free to all, NO pass! Use the Token Software, enter a username as you like and password. FDL Coding Demonstration using E-Sys 3.24.2 and TokenMaster's EST Software Token on my BMW.
Esys Software Psdzdata Pc
Download Psdzdata 3.61.5 Lite:
NO pass, free to all.
Enjoy at your own risk and hope it helps!
BMW E-SYS 3.29.0 software info for checking
Operating system: WIN XP 32 bit, WIN 7 32 bit
RAM: At least 512MB
Processor: Pentium 4 computer with minimum 1GHz clock frequency
Java version: Java 1.6.0_27, Java 1.7.0_51 (32 bit), Java 1.8.0_92(32 bit)
Hardware interface: BMW ICOM A2, ICOM NEXT, BMW ENET Coding Cable…
Difference: ENET Cable is cheapest solution for BMW F Series Coding. But with ICOM, you can not only do coding, but diagnosis all BMW E, F, G, I Series…
How to install E-Sys 3.29.0? (Set E-Sys 3.26.1 as example)
Extract E-Sys using Winrar. Right click it and click “extract here”.
Run E-Sys_Setup_3_26_1_b42487.exe
Select language, click “Next” then “I accept the agreement” then “Next”.
Click “Browse” to choose where to install E-Sys. The default location is C:EC-AppsESGE-Sys.
Set the data path for E-Sys, the default is C:Data.
Click next until the installation begins.
Click “Finish” to complete the basic installation procedure for E-sys.
Then you need to make it work.
You will see two folders, one is a “Patch” the other is “Token Generator”.
The patch folder contains 2 files
Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)
Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)
Use the Token Software, enter a username as you like and password.
How to install psdzdata?
This is an important and final step of the installation process. The E-Sys installation doesn’t contain any data so you must copy the data into the right folder.
It’s recommended to use the Psdzdata “Lite” version because it has all the Firmware data removed so it saves a lot of space!
Extract Psdzdata using Winrar. Right click it and click “extract here”.
After that go to C:Data and erase the existing “Psdzdata” folder and copy this extracted new one in the same location.
http://www.autocardiag.com/wifi-bmw-icom-a2bc-diagnostic-and-programming-tool-with-hdd-p-499.html
----------------------------------------------------------------------------------------------------
INSTALL E-SYS & EDIABAS
----------------------------------------------------------------------------------------------------
01) Run 'E-sysE-Sys_Setup_3_25_3_RC_b40861.exe' to install program to default location 'C:EC-AppsESG' (i.e. 'C:EC-AppsESGE-Sys')
02) During E-Sys installation, when prompted change the default Data Path from 'C:Data' to 'C:ESysData'.
03) Copy 'EDIABAS' folder to the root of 'C:' (i.e. 'C:EDIABAS')
04) Run 'C:EDIABASHardwareEdiabas-KonfiguratorEdiabas-Konfigurator.exe' and make sure 'Interface:' is set to 'INTERFACE=ENET'.
(It should already be set, but check anyway - if you need to change it, use the drop-down list and select 'INTERFACE=ENET' and then 'Andern' and then 'Ende'.)
----------------------------------------------------------------------------------------------------
INSTALL E-SYS EST TOKEN
----------------------------------------------------------------------------------------------------
05) Create subfolder 'E-Sys EST' under 'C:ESysData' (i.e. 'C:ESysDataE-Sys EST')
06) Copy EST Token File (e.g. 'esys_v1.4.EST') to 'E-Sys EST' folder (i.e. 'C:ESysDataE-Sys ESTesys_v1.4.EST')
----------------------------------------------------------------------------------------------------
INSTALL PSdZData
----------------------------------------------------------------------------------------------------
07) If existing 'psdzdata' folder exists in 'C:ESysData' (i.e. 'C:ESysDatapsdzdata') delete it.
08) Copy downloaded 'psdzdata' folder to 'C:ESysData' (i.e. 'C:ESysDatapsdzdata')
09) Make sure that there is a 'Dist' folder in each of the Chassis folders (F01/F10/F20/F25/K001/RR01) etc.
(e.g. 'C:ESysDatapsdzdatamainseriesF010F010_12_03_511odxdist')
(It should already be set, but check anyway - if not there - create empty 'Dist' folders for each chassis folder)
----------------------------------------------------------------------------------------------------
CONNECT AND CONFIGURE E-SYS
----------------------------------------------------------------------------------------------------
10) Turn Car's Auxiliary Power On (Engine Off) and make connection to car with OBDII-Enet Interface Cable
(Wait a few minutes until the network adapter icon shows a Connection with the yellow exclamation point over it)
(The car does not have a DHCP server, so it does not assign an IP Address to the computer. Both the computer and the car will go into DHCP fallback mode, each assigning themselves a random Class-B IP Address so that they can talk to each other. This can take up to 60 seconds, so you have to wait until the PC has an IP address before you try to connect).
(If you are running E-Sys in a Virtual Machine (VM), make sure you set the VM NIC to bridging mode, not NAT.)
11) Launch 'C:EDIABASHardwareENETZGW_SEARCH.exe' to verify cable and connection are working.
(Select Refresh Button until connection data appears (IP, ADR, MAC, & VIN) verifying actual communication to the car)
(ZGW_SEARCH.exe is non-functional (informational only) and not a requirement to run E-Sys. If you cannot get ZGW_SEARCH.exe working, instead verify the laptop's wired network adapter has an Class-B IP Address (128 to 191.xxx.xxx.xxx)).
12) Run 'C:EC-AppsESGE-SysE-Sys.exe' (It will take E-Sys a while to write the log file).
Under Options, Settings:
On the PROGRAM TAB, set the Directories - Data Path to 'C:ESysData'
On the EST Tab, set the Developer-Soft-Token EST Path to match EST Token installed in Step 06 above
(e.g. 'C:ESysDataE-Sys ESTCode Away.EST')
On the ODX Tab, set the ODX Rule Path to 'C:ESysDataRules'
13) Hit the Connect Button on E-Sys toolbar and select desired Target Vehicle (e.g. TargetSelectorroject=F010-12-03-511m VehicleInfo=F010)
(DO NOT use the Target with the _DIRECT suffix (e.g. TargetSelectorroject=F010-12-03-511m VehicleInfo=F010_DIRECT)
(F001 psdzdata covers the F01/F02/F04 7-series and the F07 5-series)
(F010 psdzdata covers the F10 5-series, the F12/F13 6-series, and the F06 6-series Gran Coupé)
(F020 psdzdata covers the F20 1-series and F30 3-series (There is no Z4 F-chassis yet))
(F025 psdzdata covers the F25 X3-series (There is no X5 F-chassis yet))
14) Select Connection via VIN, and click Connect
(Window should pop up confirming successful connection)
(The program will remember the 'connection via VIN' for future connections)
----------------------------------------------------------------------------------------------------
NOTES
----------------------------------------------------------------------------------------------------
A) Each time E-Sys is launched, the first time the FDL Editor or CAF-Viewer is invoked, either directly via 'Editors & Viewers => FDL-Editor' or 'Editors & Viewers => CAF-Viewer' or indirectly via right-clicking on a module's read CAFD and selecting 'Edit FDL', you will need to enter the EST Token PIN, which came separately with the EST Token).
B) Coding KOMBI (Instrument Cluster) module will cause the car to chime and the dashboard to reset including the clock. Simply reset the vehicle Date and Time via iDrive when done coding module.
C) Some modules take a long time before the changes begin working (e.g. trunk and mirror close). If still not working after an hour or so of being off (asleep), try recoding the module again, even if it looks like the correct parameter (e.g.'nicht_aktiv') is set.
D) If Coding for an extended period of time (>30 minutes or so) ensure car is on a charger to avoid killing the battery. You can safely code with the Engine Running to keep it charged with the exception of the DME module.
E) If you want to look at a read CAFD file's net coding data (.ncd files) go to the 'Editors & Viewers => FDL-Editor', put your PIN in, and then navigate to your CAF folder (C:ESysDataCAF) and select the desired CAFD file's corresponding read coding data .ncd file. You DO NOT need to be connected to the car.
(e.g. Module CAFD Name cafd_000000f9.caf.007_003_167 = CAFD_000000F9_007_003_067.ncd)
F) If you want to look at an unread CAFD file, go to the 'Editors & Viewers => CAF-Viewer', put your PIN in, and then navigate to your CAFD folder (C:ESysDatapsdzdataswecafd) and select the desired CAFD. You DO NOT need to be connected to the car.
(e.g. Module CAFD Name cafd_000000f9.caf.007_003_167)
----------------------------------------------------------------------------------------------------
Patch Installation Instructions
----------------------------------------------------------------------------------------------------
Replace the original JAR files with the ones supplied here:
[*] est-cm-01.05.01.jar --> C:EC-AppsESGE-Syslibestcmest-cm-01.05.01.jar
[*] psdz-core.jar --> C:EC-AppsESGE-SyslibPsdZpsdz-core.jar
[*] copy EST Token File (e.g. 'esys_v1.4.est') to 'E-Sys EST' folder (i.e. 'C:ESysDataE-Sys ESTesys_v1.4.est')
example of coding
NcdCafdTool v0.2.4 by MasterToken for coding comparing and changing FA etc
Author thread here <<< Link >>>
Do not forget say and press reputation button